Meet the Printmakers: our new members, Part 1

We’ve recently welcomed four new members to our Southbank Printmakers collective:
Shirley Cheung, Sam Halpenny, Alex Monges and Fiona Wallin.
We’re delighted that they’ve joined us and that their wonderful prints are now showing on our walls and in the browsers of the gallery. By way of introduction, we asked them each a few questions to get an insight into their printmaking practice.
Here, in Part 1, Shirley and Sam share their thoughts about their introduction to print, their printmaking techniques, and what brings them joy.
How did you get into printmaking?
Shirley:
I randomly found a one day introductory course on woodcut printing with Alex Booker in summer 2019. Alex was a good teacher and had given me the knowledge and tools to practice at my leisure. Then, I encountered another good teacher Carol Justin Wilhide who taught me the in-depth knowledge about woodcut, in both western and eastern traditional method.
That said, all the signs were there from University days but I had no clue then, that I would fall head over heels with printmaking in midlife. It was like learning something that I have forgotten long ago - when I first held a carving tool in my hand again in Alex’s studio.
Sam:
I had enjoyed lino printing when I was young, so I returned to that initially. I started printing with lino at home and squashing the plate onto paper with a pile of books or the back of a wooden spoon. Later, when I got into a real print studio, I got to use a Victorian relief press, which gives you lovely even pressure giving solid ink distribution.
But I was curious to try different techniques, so I did some courses at the Working Men’s College. This led to me experimenting with etching, aquatint, cyanotype and photo polymer printing. I also wanted to understand how to screen print so I went along to East London Print Studio and Shadwell Print Studio to learn about it.

What do you find most challenging about your technique/ method?
Shirley:
Registrations. It is difficult to get all the layers lined up on top of each. I try not be too hard on myself when a print did not go as well as planned. It is OK to start again and embrace happy accident.
Sam:
Aquatint etching has a number of steps to go through to produce a finished print and at each stage there is room for error or for something to go wrong.
The wax ground that has to be rolled onto the zinc or steel plate needs to be applied over a hot plate. This can often be quite tricky to get an even coating of ground. The plate is then smoked to fix the ground, but putting a hot plate into a precarious wooden holder, smoking the plate with a flaming taper and removing the plate without smudging the ground, can be challenging, especially with larger plates. It’s a job that needs three hands!
Another crucial stage is putting the aquatinted plate into the nitric acid bath for the correct amount of time in order to get a tone etched onto the plate. This can be a matter of seconds, to get a light tone. If the acid is too strong, the etch will be too dark. Weak acid, and the etch will be too pale. It’s a bit like Goldilocks & the Three Bears. The acid has to be just right, at a ratio of 1:7 acid to water.
What was your first print?
Shirley:
It was a squirrel. Now hanging in my friend Tammy’s living room (who kindly sent me a photograph of it). Inspired by an encounter with a squirrel, one autumn afternoon in a small park in Bethnal Green. It jumped in front of me on the path, it looked up at me as if it was asking for food. I didn’t have any; it was not moving. We stared at each other for about 10 seconds and 10 seconds is a long time in the world of squirrels.
Sam:
This was my first experiment with etching on a zinc plate:
And this was my first experiment with using aquatint. It can allow the use of brush strokes.

This was my first experiment with paper stencil screen printing:

What is the current subject matter for a print that you cannot stop thinking about?
Shirley:
Mandarin ducks. The male ducks are extremely handsome, their colourful feathers do not make any anatomical sense; they sleep standing on one leg with one eye closed. I searched for them by the Serpentine lake but couldn’t see any. I need to talk to Tim. [Tim Mitchell of Southbank Printmakers.]
Sam:
A while ago, I was inspired by a fellow printmaker to try using circular zinc plates to make a round print. So I have been planning to make a print of my friend’s iconic vintage Citroën DS car, incorporating the circular tyre in the design.
What brings you joy?
Shirley:
Slow mornings with a Lady Grey tea, it is so much more zestier than Earl Grey.
Sam:
There is a moment of trepidation when peeling off the paper from a press to reveal a print for the first time. You are wary of being over confident, because of previous disappointments, but also excited to see the finished print. When you reveal a successful print, there is a mixture of joy, but also relief. And that’s not a pun. I print mainly intaglio!


You can browse more of Shirley and Sam's prints through our online shop.
Or better still, come and see them in person at our gallery at 73 Wells Street, London W1T 3QG
We look forward to Fiona and Alex’s Q&As which will follow in the next blog.




Comments